Telecom Networking
Please architect, configure, and discuss the following questions?

PART: 1

1. How many sub-nets are available if a class C address has six bits of sub-netting? How many host addresses are available per sub-net? Is there a practical use for such a sub-netting scheme?

2. Use a 28 bit mask to derive the available sub-nets of 192.168.147.0. Derive the available host addresses of each sub-net.

3. How many sub-nets are available if a class C address has six bits of sub-netting? How many host addresses are available per sub-net? Is there a practical use for such a sub-netting scheme?

4. Use a 28 bit mask to derive the available sub-nets of 192.168.147.0. Derive the available host addresses of each sub-net.

Show all Work.

PART: 2

1. Design and present the wiring configuration of CAT 5e and RJ-45 interface.
• Rollover
• Cross-Over
• Straight Thru
2. Write a report on the following fail-over mechanisms in a network switching environment:
• Spanning Tree Protocol
• Rapid Spanning Tree Protocol
3. What is the difference between an Ethernet Switch and Ethernet hub? Which is more suitable for a network with high traffic load?
4. Which role does spanning tree protocol play when interconnecting LAN switches?
5. In the context of the IEEE 802.1d specification of the spanning tree protocol, define the following terms:
• Root Bridge
• Root Port
• Designated Bridge
• Designated Port
• Blocked Port
6. Describe the following two network switching technologies:
• Cut- Thru Forwarding technology.
• Store and Forwarding technology.
• Fragment Free Forwarding.
How are they used in today’s networking switching environment?

PLACE THIS ORDER OR A SIMILAR ORDER WITH US TODAY AND GET A GOOD DISCOUNT